5 bar Aluminum Tread Checker Plate supplier
The 5 bar aluminum tread plate is also known as an aluminum ribbed plate or aluminum diamond plate 5 bars. The surface always has 5 patterns or ribbed and another side has a smooth surface. Our factory can produce three different pattern lengths: Big 5 bar length is 42mm, middle 5 bar length is 36mm, small 5 bar length is only 34mm.
Alloy : 1050, 1060,1100, 1200,3003,3105, 5052, 5754,5083,6061,
Temper: O, H12, H14, H24, H16, H26, H18, T6
Thickness: 1mm to 12mm,
Width: customed
Length: customed
Surface treatment: Mill finish, mirror finish, paper-interleaved,
Chemical composition of 5 bar Aluminum Tread Checker Plate
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1060 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | 99.6 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | 99.5 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | 99 | |
| 1200 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | 99 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remainder |
Application of 5 bar Aluminum Tread Checker Plate:
it is mainly used for work with slightly higher strength requirements than Series 1, such as pressure tanks, storage tanks, heat preservation material, mechanical parts, automobile, and aircraft fuel tanks, etc. It is used in air conditioners, refrigerators, cars, and planes. In conventional applications in air conditioning, refrigerators, under the car, and other humid environments, the price is higher than the 1xxx series.
| Tread aluminum sheet pattern | Picture |
|---|---|
| 1 Bar Aluminum diamond plate |  |
| 2 Bar Aluminum diamond plate |  |
| 3 Bar Aluminum diamond plate |  |
| 5 Bar Aluminum diamond plate |  |
Production video of 5 bar aluminum tread plate
Get An Instant Quotation
Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.
